GOOFIT
3-Wire Fuel Tank Level Sensor for CN250 CH250 Big Ruckus Baja 250cc Water-Cooled
3-Wire Fuel Tank Level Sensor for CN250 CH250 Big Ruckus Baja 250cc Water-Cooled
5.0 / 5.0
(2) 2 total reviews
Couldn't load pickup availability
Product Overview
Replacement 3-wire fuel tank level (float) sensor for 250cc water-cooled scooters, ATVs and go-karts. Sends fuel level signal to the fuel gauge via a 3-pin male plug. Built from durable materials to resist aging and provide reliable readings for daily use and OEM-style replacements.
Product Compatibility
Please confirm connector type (3-pin male) and mounting before ordering.
| Vehicle Type | Model / Series | Engine / Notes |
|---|---|---|
| Scooter | Helix CN250 | 250cc water-cooled |
| Scooter | Elite CH250 | 250cc water-cooled |
| Scooter | Big Ruckus | 250cc water-cooled variants |
| ATV / Go-Kart | Baja / Hammerhead 250 | 250cc water-cooled |
| General | 250cc Water-Cooled Models | Fits tanks using a 3-wire male plug sensor |
Specifications
| Specification | Details |
|---|---|
| Product Type | Fuel Tank Level (Float) Sensor |
| Connector | 3-wire, 3-pin male plug |
| Function | Sends fuel level signal to gauge |
| Compatible Engines | 250cc water-cooled (listed models) |
| Materials | Metal / Plastic / Rubber (quality materials) |
| Condition | 100% Brand New |
| Fitment Note | Confirm plug type & tank mounting prior to purchase |
Key Features
- Direct replacement for 3-wire fuel gauge systems
- 3-pin male connector for plug-and-play installation
- Durable construction with anti-aging materials
- Provides accurate fuel level readings to the dashboard gauge
- OEM-style fit for CN250, CH250, Big Ruckus and Baja 250cc vehicles
Share
Fitment FAQ
Will this part fit my specific model and year?
This replacement part is intended for Please confirm connector type (3-pin male) and mounting before ordering.; Vehicle Type; Model / Series. Key physical/spec details from the product data include Please confirm connector type (3-pin male) and mounting before ordering., 3-wire, 3-pin male plug, 3-pin male connector for plug-and-play installation. Use the compatibility table and product photos together before ordering.
Do I need to match the OEM part number?
Yes. If your original part has a stamped OEM or manufacturer number, match that number first before ordering. For this replacement part, also compare the OEM number, dimensions, connector or mounting style, engine/model year, and product photos. This is especially important for Baja CN250/CH250 models because similar model names can use different parts by year or trim.
What models or situations does this part not fit?
Do not order this replacement part for machines outside the listed compatibility, or for units with different OEM numbers, dimensions, mounting points, connectors, or year-specific configurations. Do not rely only on the model name or engine size.
What should I check before ordering?
Before ordering, compare your original part with the photos and check the OEM number, dimensions, connector or mounting style, engine/model year, and product photos. Recheck listed specs such as Please confirm connector type (3-pin male) and mounting before ordering., 3-wire, 3-pin male plug, 3-pin male connector for plug-and-play installation. If any connector, mounting point, size, or year detail is different, confirm fitment before installation.
Installed on a Honda Helix you do need to just switch the blue and green wires but its super easy, works accurate so far after 150mi
As stated in other review, for it to work on the Honda helix you need to switch around the placement of the green/blue wires. You can use a small pick or flat head screw driver and press the metal tab inside the plug and pull the wire out from the back and swap them around. I plugged it in prior to putting it in the tank and was able to simulate different levels of fuel readings. One thing I would say is that it seems to take a bit of time holding it in one position for the reading to change. My oem one was broken when I got my Helix so don't know if that is the same function. I reused the lock ring from the original one because the one that comes with this is a little flimsy.