GOOFIT
7/8" Green Handguards with Aluminum Alloy Lever for Suzuki Kawasaki Dirt Bike ATV
7/8" Green Handguards with Aluminum Alloy Lever for Suzuki Kawasaki Dirt Bike ATV
4.5 / 5.0
(2) 2 total reviews
Couldn't load pickup availability
Product Overview
The GOOFIT Green Brush Guards are a premium protective assembly featuring integrated 6061 Aluminum Alloy reinforcement. Built to withstand high-velocity impacts, these guards shield your hands from roost and wind while providing a secondary layer of protection for your levers during a crash. The heat-treated aluminum frame ensures they won't snap under pressure, making them an essential upgrade for serious off-road riders.
Product Compatibility
These guards fit standard 22mm (7/8") handlebars and are widely used on models from the following brands:
| Brand | Typical Models | Handlebar Size |
| Suzuki | RM 85/125/250, RMZ 250/450, DRZ 400 | 7/8" (22mm) |
| Kawasaki | KX 65/85/250, KXF 250/450, KLX Series | 7/8" (22mm) |
| Honda | CRF 150/250/450, XR 250/400/600 | 7/8" (22mm) |
| Yamaha | YZ 85/125/250, YZF 250/450, TTR Series | 7/8" (22mm) |
| ATV / Pit Bike | Apollo, SSR, Polaris, Arctic Cat | 7/8" (22mm) |
Specifications
| Component | Details |
| Frame Material | 6061 Aluminum Alloy (T4 & T6 Heat Treated) |
| Shield Material | High-Quality Impact-Resistant PP Plastic |
| Anchor Spacing | 22mm / 7/8" |
| Expansion Bolt ID | 14mm - 20mm (0.55" - 0.78") |
| Hardware | Heavy-Duty Stainless Steel Bolts |
Key Features
- Reinforced Aluminum Frame: Uses T4/T6 heat-treated 6061 aluminum for maximum rigidity and protection against heavy collisions.
- Dual Protection: Shields hands from sand, flying stones, and cold wind while preventing lever damage during a tip-over.
- Vibrant Racing Finish: The high-gloss green PP plastic is UV-resistant and designed to perfectly match Suzuki or Kawasaki racing liveries.
- Universal Mounting: Fits most hollow 7/8" bars via an adjustable tension pipe system (14mm-20mm inner diameter).
- Enhanced Safety: Strengthens the overall front-end durability of your motorcycle for safer travel in rugged off-road environments.
Share
Fitment FAQ
Will this part fit my specific model and year?
This handguard is intended for These guards fit standard 22mm (7/8") handlebars and are widely used on models from the following brands; Typical Models; Handlebar Size; Suzuki; RM 85/125/250, RMZ 250/450, DRZ 400; 7/8" (22mm); Kawasaki. Key physical/spec details from the product data include Anchor Spacing: 22mm / 7/8", Expansion Bolt ID: 14mm - 20mm (0.55" - 0.78"), Universal Mounting: Fits most hollow 7/8" bars via an adjustable tension pipe system (14mm-20mm inner diameter).. Use the compatibility table and product photos together before ordering.
Do I need to match the OEM part number?
Yes. If your original part has a stamped OEM or manufacturer number, match that number first before ordering. For this handguard, also compare the handlebar diameter, mounting clamp size, lever clearance, bar-end setup, and brake/clutch lever shape. This is especially important for Kawasaki/Suzuki models because similar model names can use different parts by year or trim.
What models or situations does this part not fit?
Do not order this handguard for machines outside the listed compatibility, or for units with different handlebar diameters, lever shapes, bar-end setups, or clamp positions. Do not rely only on the model name or engine size.
What should I check before ordering?
Before ordering, compare your original part with the photos and check the handlebar diameter, mounting clamp size, lever clearance, bar-end setup, and brake/clutch lever shape. Recheck listed specs such as Anchor Spacing: 22mm / 7/8", Expansion Bolt ID: 14mm - 20mm (0.55" - 0.78"), Universal Mounting: Fits most hollow 7/8" bars via an adjustable tension pipe system (14mm-20mm inner diameter).. If any connector, mounting point, size, or year detail is different, confirm fitment before installation.
Did not fit my kalisoki 300 SM also not the new kalisoki green
Awesome unit