GOOFIT
Stator for Aprilia ETV1000 Caponord 2001–2007 | AP0295835
Stator for Aprilia ETV1000 Caponord 2001–2007 | AP0295835
5.0 / 5.0
(3) 3 total reviews
Couldn't load pickup availability
Product Overview
Restore reliable charging-system output with this 18-coil, 3-wire magneto stator, designed for compatible 2001–2007 Aprilia ETV 1000 Caponord / Capo Nord motorcycles.
Built as an aftermarket replacement for AP0295835, this stator features an approximately 115mm outer diameter and 54mm inner diameter.
A failing stator may contribute to symptoms such as a battery that does not remain charged, low charging voltage, intermittent electrical problems, or reduced AC output from one or more stator phases.
Product Compatibility
| Make | Model | Engine | Year Range | OEM Reference |
|---|---|---|---|---|
| Aprilia | ETV 1000 Caponord / Capo Nord | 1000cc | 2001–2007 | AP0295835 |
Model References
- Aprilia ETV 1000 Caponord
- Aprilia ETV1000 Capo Nord
- Aprilia Caponord 1000
OEM Cross-Reference Number
Aprilia: AP0295835
Aprilia parts references identify AP0295835 as the 12V 420W ignition/generator unit used in the ETV 1000 Capo Nord application.
When possible, compare the original component number as well as the stator dimensions and wiring before ordering.
Specifications
| Specification | Details |
|---|---|
| Product Type | Magneto Stator / Generator Stator |
| Make | Aprilia |
| Model | ETV 1000 Caponord |
| Engine Size | 1000cc |
| Listed Year Range | 2001–2007 |
| Number of Coils / Poles | 18 |
| Number of Wires | 3 |
| Stator Outer Diameter | Approx. 115 mm / 4.53 in |
| Stator Inner Diameter | Approx. 54 mm / 2.13 in |
| OEM Reference | AP0295835 |
| Replacement Type | Aftermarket |
| Condition | New |
Key Features
- 18-Coil Design: Matches compatible ETV1000 Caponord stator configurations using an 18-pole winding assembly.
- 3-Wire Output: Designed for compatible three-phase charging-system connections.
- 115mm Outer Diameter: Provides an important physical reference for comparison with the original stator.
- 54mm Inner Diameter: Helps confirm the correct stator size before installation.
- AP0295835 Reference: Cross-referenced with the compatible Aprilia generator/stator assembly.
Share

Fitment FAQ
Will this part fit my specific model and year?
This stator is listed for 2001–2007 Aprilia ETV 1000 Caponord / Capo Nord motorcycles.
For the strongest fitment confirmation, compare the OEM reference, stator dimensions, coil count, wiring, connector, and mounting configuration with your original part.
Do I need to match the OEM part number?
Matching the original part number is recommended.
The listed replacement reference is:
AP0295835
Also verify:
18-coil configuration
3-wire output
Approx. 115mm outer diameter
Approx. 54mm inner diameter
Connector configuration
Mounting points
What models or situations does this part not fit?
Do not assume this stator fits:
Every Aprilia 1000cc motorcycle
Every Caponord generation
Applications using a different stator diameter
Stators with a different coil count
Different wiring or connector configurations
Motorcycles with incompatible mounting points
The original supplier listing states 2001–2009, but the verified ETV1000 Caponord application range used on this page is 2001–2007.
What should I check before ordering?
Confirm:
Aprilia ETV 1000 Caponord / Capo Nord
2001–2007 model year
AP0295835 reference where applicable
18 coils
3 wires
Approx. 115mm outer diameter
Approx. 54mm inner diameter
Mounting-hole locations
Wire exit position
Connector type and pin arrangement
Original stator appearance
Compare the product photos and measurements directly with the original stator before purchase.
Nice GOOFIT 18 Coil 3 wires motorcycle stator coil Ignition generator
This product is designed explicitly for ETV1000 models from 2001 to 2009.
It offers a remarkable quality, especially considering its competitive pricing.
This stator coil Ignition generator ideally reflects a balance between affordability and quality.
Overall, it's working as expected so far!
With manufacturers parts not being available anymore, it's good to see someone manufacturing high quality components to keep the bikes alive. The GOOFIT magneto is perfect for ETV1000 bikes and it's a good fit too.
Price is great considering difficulty getting one and overall value for money is decent enough due to that.
Installed on my 2004 ETV1000 Caponord and it fit just like the original. Charging is working properly again.