GOOFIT
Intake Manifold for Kawasaki KX60 1983–2003 | 12023-1019
Intake Manifold for Kawasaki KX60 1983–2003 | 12023-1019
Impossibile caricare la disponibilità di ritiro
Product Overview
Restore a secure and properly sealed connection between the carburetor and reed-valve assembly with this replacement intake manifold, designed for compatible Kawasaki KX60 two-stroke dirt bikes from 1983 through 2003.
Also referred to as a reed valve holder or carburetor intake boot, this component replaces an original manifold that has become cracked, hardened, loose, distorted, or difficult to seal after prolonged exposure to engine heat, vibration, fuel vapor, dirt, and off-road riding conditions.
A damaged intake manifold can allow unmetered air to enter the engine, potentially causing difficult starting, unusually high or unstable idle, hanging RPM, hesitation, inconsistent throttle response, or a lean-running condition.
Designed as a direct replacement for Kawasaki OEM 12023-1019, this manifold installs in the original intake position when the opening diameter, mounting-hole pattern, clamp location, and overall shape match the original part.
Product Compatibility
| Brand | Model | Model Code / Series | Year Range | Fitment Notes |
|---|---|---|---|---|
| Kawasaki | KX60 | KX60-A / KX60-B Series | 1983–2003 | Confirm OEM number and physical configuration |
This product is intended for Kawasaki KX60 applications using OEM 12023-1019.
Production specifications and replacement components may vary by region or previous engine modifications. Always compare the original manifold with the product photos and measurements.
OEM Cross-Reference Numbers
Kawasaki
- 12023-1019
- 120231019
Kawasaki identifies this component as:
- Holder-Valve, Reed
- Reed Valve Holder
Aftermarket sellers may also describe it as:
- Carburetor intake manifold
- Carburetor intake boot
- Carburetor joint
- Reed-valve intake holder
These names refer to the intake connection component, not the reed petals themselves.
Specifications
| Specification | Details |
| Product Type | Carburetor Intake Manifold / Reed Valve Holder |
| OEM Reference | 12023-1019 |
| Material | Rubber-Based Construction |
| Color | Black |
| Air Intake Inner Diameter | Approximately 32.5 mm / 1.28 in |
| Mounting-Hole Diameter | Approximately 6 mm / 0.24 in |
| Listed Mounting Measurement 1 | Approximately 58 mm / 2.28 in |
| Listed Mounting Measurement 2 | Approximately 47 mm / 1.85 in |
| Engine Type | Two-Stroke |
| Application | Carburetor-to-Reed-Valve Connection |
| Fitment Type | Direct Replacement |
| Vehicle Type | Off-Road Motorcycle / Dirt Bike |
| Condition | New |
| Package Quantity | 1 Intake Manifold |
The original inch conversions have been adjusted for accuracy:
- 32.5 mm is approximately 1.28 inches.
- 58 mm is approximately 2.28 inches.
- 47 mm is approximately 1.85 inches.
The 58 mm and 47 mm figures may refer to different mounting points or flange dimensions. Compare the exact measurement locations shown in the product images.
Key Features
- 1983–2003 KX60 Fitment: Designed for compatible Kawasaki KX60 dirt bikes using OEM 12023-1019.
- Helps Prevent Intake Leaks: Restores a sealed connection between the carburetor and reed-valve assembly.
- Durable Rubber Construction: Designed to withstand normal engine heat, vibration, fuel vapor, dirt, and off-road riding conditions.
- Replaces Aged Intake Manifolds: Suitable for replacing an original holder that has become cracked, hardened, loose, or distorted.
- Direct-Replacement Configuration: Installs in the original position when the OEM number, mounting pattern, opening, and shape match.
Condividi
Domande frequenti sulla compatibilità
Questa parte è compatibile con il mio modello e anno specifici?
This intake manifold is designed for compatible 1983–2003 Kawasaki KX60 two-stroke dirt bikes.
Your motorcycle should use Kawasaki part number 12023-1019, and the original manifold should match the listed intake opening, mounting-hole pattern, clamp location, dimensions, and overall shape.
Because older motorcycles may have replacement engines, carburetors, or modified intake systems, the model year alone should not be used as the final fitment confirmation.
Devo corrispondere al numero di parte OEM?
Yes. Matching the complete OEM number is one of the most reliable ways to confirm compatibility.
This product replaces:
12023-1019
120231019
These are different formatting versions of the same Kawasaki part number.
If the original manifold or Kawasaki parts diagram shows a different number, do not assume compatibility based only on appearance or engine displacement.
A quali modelli o situazioni non si adatta questa parte?
This intake manifold is not confirmed for:
Kawasaki KX65 models
Kawasaki KX80 or KX85 models
Kawasaki KDX models
Motorcycles using a different reed-valve holder number
Bikes fitted with aftermarket carburetors requiring a different opening diameter
Engines using a modified reed cage or intake system
Engine-swapped or heavily modified motorcycles
Applications with different mounting-hole positions
Models where the original intake angle or flange shape differs
Applications requiring the reed petals or complete reed-valve assembly
Do not assume that all Kawasaki two-stroke dirt bikes use the same intake manifold.
Cosa dovrei controllare prima di ordinare?
Before ordering, confirm:
Kawasaki KX60 model
Exact production year
OEM number 12023-1019
Approximately 32.5 mm / 1.28 in intake inner diameter
Approximately 6 mm / 0.24 in mounting-hole diameter
Listed 58 mm / 2.28 in mounting measurement
Listed 47 mm / 1.85 in mounting measurement
Exact measurement locations shown in the product images
Carburetor outlet diameter
Reed-valve-side mounting pattern
Intake angle and orientation
Clamp location
Overall flange and housing shape
Also inspect the carburetor clamp, reed petals, reed cage, gaskets, crankshaft seals, fuel line, and airbox connection for additional wear or air leaks.